Use And Adjustment Of Spaghetti Machine

The vertical accumulation or excessive tension of the face belt between the rolls indicates that the roll gap is inappropriate. According to the final belt width of the process requirements, the last group of roller gap is usually fixed, and it needs to adjust the droop or tension of the belt. Spaghetti machine can only be adjusted one by one. If the surface of the two groups of rollers is sagging or stacked, it shows that the clearance of the rear roller is too small, the front roller is much more surface, and the rear roll is too late to roll, so the clearance of the front roller should be reduced. On the contrary, if the face belt is too tight, increase the gap between the front rollers and keep the face belt properly tensioned between the pressure rollers.