China Sichuang Machinery Manufacturing Co., Ltd

Electric Winch

Current location£ºHome >> News >> Construction Machinery >> Electric Winch

Requirements For Operators Of Electric Winch

Author£º Date£º2021/10/23 11:10:33 Visits£º

Requirements for operators of electric winch

1. The winch driver shall be trained professionally and take the post with certificate. During operation, he shall concentrate. If any obstacle is found in the line of sight, it shall be removed in time. When the signal is unclear, he shall not operate.

2. Idling shall be carried out before operation, and the operation can only be carried out after confirming that the electrical, braking and environmental conditions are good. The operators shall know the main contents and workload of the operation on duty in detail.

3. When the lifted object does not completely fall on the ground, the driver shall not leave his post. When resting or suspending operation, objects or lifting cages must be lowered to the ground. After work, cut off the power supply and close the switch box.

4. The driver shall pay attention to the operating conditions and the wear of steel wire rope at any time. When the load changes and is lifted for the first time, stop 0.5m above the ground and continue to rise when there is no problem.

5. When using the single drum winch, the descent speed must be controlled by braking. Do not brake too fast and violently, but fall slowly.

6. It is forbidden to use the handle type switch to prevent collision and misoperation.

electric winch

7. The steel wire rope shall be coated with grease regularly and placed in a special channel to prevent rolling and overturning from damaging the strength of the steel wire rope.

8. When the rated tension of the winch is greater than 125kN, a rope guide shall be set, the steel wire rope on the drum shall be reserved for at least 3 ~ 5 turns, and the end of the steel wire rope shall be fixed reliably.

9. The distance from the outer edge of the drum to the outermost wire rope shall not be less than 1.5 times the diameter of the wire rope

10. During operation, no one is allowed to cross the winch wire rope under operation.



Demand table loading...
Your needs£º
Your E-mail£º     Check code£º