China Sichuang Machinery Manufacturing Co., Ltd

Knife Sharpener

Current location£ºHome >> News >> Machine Tool >> Knife Sharpener

Operation Steps Of Knife Sharpener Machine

Author£º Date£º2021/10/27 10:58:07 Visits£º

Operation steps of knife sharpener machine£º

1. Put the knife on the cutter table and adjust the protrusion of the knife to about 0.5-1.0cm. The protrusion at both ends of the knife should be the same, which can be fine tuned by jacking screw. Turn on the magnetization switch of the electromagnetic device button to make the knife adsorb on the knife table. Adjust the position of the angle between the grinding wheel and the blade. If the blade is in contact with the grinding wheel, turn the feed handwheel to separate it.knife sharpener

2. Turn on the power supply, turn on the power switch, and the machine will enter the normal working state.

4. Turn the feed hand wheel to push the blade inward slowly and evenly until it contacts the grinding wheel. Adjust the tightness of the contact between the blade and the grinding wheel so that the grinding wheel and the blade can work well.



Demand table loading...
Your needs£º
Your E-mail£º     Check code£º