Scrap Rebar Straightener
Structure Of Waste Steel Bar Straightener
Structure of waste steel bar straightener: firstly, the scrap rebar straightening machine is driven by the motor through the belt to increase the speed, so that the straightening cylinder rotates at high speed, the steel bar passing through the straightening cylinder is straightened, and the rust on the steel bar surface is removed by the straightening die; The waste steel bar straightener is driven by the motor through another pair of reduction belts and gear reduction boxes. On the one hand, it drives two transmission pressure rollers to pull the steel bar forward, on the other hand, it drives the crank wheel to make the hammer head move up and down. When the steel bar is adjusted to the predetermined length, the hammer head hammers the knife rest to cut off the steel bar. When the cut steel bar falls into the material receiving frame, the knife rest returns to its original position due to the action of spring to complete a cycle.
Demand table loading...
|