China Sichuang Machinery Manufacturing Co., Ltd


Current location£ºHome >> News >> Food Machinery >> Juicer

Structure And Working Principle Of Screw Juicer

Author£º Date£º2021/12/30 21:47:51 Visits£º

The main component of the screw juicer is the screw. The bottom diameter of the screw increases gradually along the direction of the slag outlet and the pitch decreases gradually. When the material is pushed by the screw, the material is pressed due to the reduction of the volume of the screw cavity. The rotation direction of the screw spindle is clockwise when viewed from the feed hopper to the slag chute. The raw material is added into the feed hopper and pressed under the propulsion of the screw. The pressed juice flows into the juice container at the bottom through the filter screen, juicerand the waste is discharged through the gap formed between the screw and the conical part of the pressure regulating head. The movement of the pressure regulating head along the axial direction can adjust the size of the gap. Clockwise by hand (from the slag discharge tank of the equipment to the feed hopper) when transferring the hand wheel bearing seat, the pressure regulating head moves to the left, the gap is reduced, otherwise, the gap becomes larger. Changing the size of the gap, that is, adjusting the slag discharge resistance, can change the juice yield. However, if the gap is too small, under strong extrusion, some slag particles will be extruded through the filter screen together with the juice. Although the juice output increases, the quality of the juice is similar For descending, the size of the gap shall be determined according to the user's specific process requirements.

Demand table loading...
Your needs£º
Your E-mail£º     Check code£º