Quotation Of Mutton Slicer Made In China

Precautions for use of mutton meat slicer:

1. Meat food must be moderately frozen and hardened, generally above "- 6 ℃" and should not be too frozen. If the meat is too hard, it should be thawed first. The meat must not contain bones to avoid damaging the blade, and it should be compressed with a meat pressing plate;

2. Adjust the thickness knob to set the required thickness;

3. Mutton slicer is a food slicer, which is suitable for cutting boneless meat and other foods with elasticity similar to mustard, cutting raw meat into meat slices, etc. the machine has compact structure, beautiful appearance, simple operation, high efficiency, low power consumption, easy cleaning and maintenance, safety and hygiene, uniform meat cutting effect and can automatically roll, It adopts imported Italian blades and belts with automatic lubrication device, with strong power. It is an indispensable meat processing machine for hotels, restaurants, canteens, meat processing plants and other units;

4. The adjustment of meat slice thickness is to increase or decrease the gasket behind the blade. Please drop some edible oil in the sliding groove to reduce friction before use. When holding the knife handle with the right hand, you must move vertically up and down, and you can't break it to the left (in the direction of meat), which will deform the knife. The frozen meat roll must have the meat skin facing inward and the fresh meat facing outward. First, it is good-looking and second, it is easy to cut without a knife;

5. Press the meat roll with your left hand and gently push it to the knife edge. After positioning, cut it with your right hand. For example, after cutting hundreds of kilograms, the phenomenon that the knife slides and cannot hold the meat in its mouth shows that the knife is dead and should be sharpened. There are instructions on sharpening the knife in the manual. If you can't sharpen it yourself, let's sharpen the scissors. If the machine used in the hotel is unstable, there are screw holes left on the machine, which can be fixed on the table for better use.