Working Principle Of CNC Gear Hobbing Machine

Working principle of CNC gear hobbing machine: when the pump is started, the driving wheel drives the driven gear, and the driven gear rotates in the opposite direction. There is good meshing between the gear and the gear. The teeth of the two gears scrape away some oil at the inlet, so it forms a low-pressure suction liquid. The liquid entering the pump body is divided into two ways,

which is pushed forward by the gear in the gap between the gear and the pump housing, The pressure is sent to the oil drain to form high pressure and drain the liquid. The main equipment of blowing gas recovery boiler include: combustion furnace, CNC gear hobbing machine, steam superheater, boiler body, second air preheater, soft water heater, air preheater, induced draft fan and forced draft fan.