China Sichuang Machinery Manufacturing Co., Ltd

Electric Winch

Current location£ºHome >> News >> Construction Machinery >> Electric Winch

Specification For Use Of Electric Winch Made In China

Author£º Date£º2022/2/25 22:07:46 Visits£º

Specification for use of electric winch made in China:

1. The steel wire ropes on the drum shall be arranged in order. In case of overlap and oblique winding, it shall be stopped and rearranged. It is forbidden to pull and step on the steel wire rope with hands and feet during rotation. The steel wire rope shall not be fully released, and at least three turns shall be reserved.

2. The steel wire rope shall not be knotted or twisted. If the wire break exceeds 10% within a pitch, it shall be replaced.

3. During operation, no one is allowed to cross the steel wire rope. After the object (object) is lifted, the operator is not allowed to leave the winch. Objects or cages should be lowered to the ground during rest.

4. During operation, the driver and signalman shall maintain good visibility with the lifted object. The driver and signalman shall cooperate closely and obey the unified command of the signal.

electric winch

5. In case of power failure during operation, cut off the power supply and lower the lifting object to the ground.

6. Follow the signal of the commander during work. When the signal is unclear or may cause an accident, the operation shall be suspended and the operation can be continued only after the situation is clarified.

7. In case of sudden power failure during operation, the knife switch shall be opened immediately and the transported goods shall be put down.

8. After the operation is completed, the material tray shall be placed on the ground and the electric box shall be closed and locked.

9. Wear of wire rope and machinery during use The corrosion and local damage of spontaneous combustion are inevitable, and protective oil shall be painted at intervals.

10. Overloading is strictly prohibited. That is, exceeding the maximum carrying tonnage.

11. Be careful not to knot during use Squash Electric arc injury Erosion of chemical medium.

12. High temperature objects shall not be hoisted directly, and the objects with edges and corners shall be protected.

Demand table loading...
Your needs£º
Your E-mail£º     Check code£º