China Sichuang Machinery Manufacturing Co., Ltd

Steel Bar Straightening Machine

Accurate Use Method Of Steel Bar Straightener

Author£º Date£º2022/8/8 20:41:48 Visits£º

Accurate use method of steel bar straightening machine

1. According to the diameter of the steel bar of the straightening machine, select appropriate straightening block, traction wheel groove and transmission speed. The diameter of the straightening block shall be 2-5mm larger than the diameter of the reinforcement, and the width of the traction wheel groove shall be the same as the diameter of the straightened reinforcement.

2. Adjustment of straightening block. Generally, there are five straightening blocks in the straightening cylinder. The first and fifth straightening blocks must be placed on the central alignment line, and the three can deviate from the line. Firstly, the rebar shall be offset by 3mm. If the rebar still has slow bending, gradually increase the offset until the straightening stops.

3. After cutting three or four reinforcing bars, stop the machine to check whether the length is appropriate. If there is any error, adjust the limit switch or length plate until it stops properly.

steel bar straightening machine

4. A 1m steel bar shall be installed at the front of the guide pipe. The steel bars to be straightened shall first pass through the steel pipe, and then pass through the guide cylinder and straightening cylinder, so as to avoid injuring people when each coil of steel bars approaches the end of straightening.

5. Before the straightening block is not fixed and the protective cover is not covered, the reinforcement shall not be inserted to prevent the straightening block from flying out and injuring people after the machine is started.

6. It is not allowed to stack objects on the machine to avoid mechanical vibration and objects falling into the machine body. When the reinforcement is loaded into the roller, the hand and the roller shall be kept at a certain interval. The roller shall not be adjusted during the operation of the machine. It is prohibited to wear gloves.

Demand table loading...
Your needs£º
Your E-mail£º     Check code£º