Cold Heading Machine
Processing Diameter Range Of Cold Heading Machine
1. Within the allowable range of cold forging diameter of the cold heading machine, the position of the clamp (screw in or screw out) can be adjusted according to the required anchor head size to obtain appropriate reinforcement (wire) extension;
2. Rust shall be removed and straightened within 120~130mm of the cold heading part of the reinforcement (wire);
3. The end of the reinforcement shall be ground flat to ensure the accurate shape of the cold heading anchor head; After the rebar heading, the tensile test shall be carried out to check whether the strength of the anchor head is qualified.
Demand table loading...
|