Operating Skills Of Steel Bar Straightening Machine

At present, the thick steel bars are generally straightened manually. Large tonnage cold drawing equipment can be used where conditions permit. For example, the winch straightening method can not only reduce the labor intensity, but also improve the strength and length of the reinforcement after cold drawing, saving steel. However, before cold drawing, it is necessary to butt weld the reinforcement, and large bends need to be straightened manually, so steel bar straightening machine is rarely used.

In the absence of cold drawing equipment, a straight hammer can also be used to straighten. For example, belt hammer, spring hammer, etc., but before straightening, it is necessary to manually straighten the large bend of the reinforcement on the column iron plate. Then hammer the small bends one by one on the straight hammer. The flat hammer uses the motor to drive the eccentric wheel to rotate by changing the speed through the belt pulley, so that the flat hammer moves up and down. The reinforcement is placed on the hammer pier and straightened under the impact of the hammer.