Catalogue Of Chinese Macaroni Machine Manufacturers

We all know that macaroni machine is a kind of equipment that forms noodles after the flour is rotated and stirred by the flour roller. It has the characteristics of convenient operation, safety and health, stable transmission and accuracy. It is widely welcomed by people who like noodles because of its low noise, superior performance and no vibration. The strip picker is to put the cut and formed noodles on the rod, which belongs to the supporting equipment of the noodle machine. The application of the equipment can better ensure the taste when making favorite noodles. Xiaobian will introduce you to the debugging method of strip picker. Let's have a look

1. Before starting the machine, pull the chain hook by hand to make the left and right hooks symmetrical.

2. Start the pressure test surface, stop the machine and adjust the chain according to the length of the noodle suspension.

3. If the front of the noodle is long, adjust the chain hook upward by (front length - rear length) ÷ 2, that is, half of the noodle length gap. If the back of the noodle is long, lower the hook upward by the same range to make the length of the noodle rod consistent.

What should be noted here is that if the front of the suspended noodles is long, adjust the chain hook upward by half of the length gap between the noodles at both ends. If it is the back strip of hanging noodles, you need to adjust the hook downward, the amplitude is the same as that in front, and adjust to the same length on both sides of the noodle rod, so as to continuously produce noodles. The noodle machine presses the dough into noodles through mechanical transmission. It is inevitable that there will be varying degrees of wear after a long time of use. Although the wear can be reduced by keeping the machine adequately lubricated, some wear can not be avoided after long-term use.