Contact Information Of Shops Selling Pasta Machines In Mauritius

We all know that pasta machine is a kind of equipment that forms pasta after the flour is rotated and stirred by the flour roller. It has the characteristics of convenient operation, safety and health, stable transmission and accuracy. It is widely welcomed by people who like pasta because of its low noise, superior performance and no vibration. The strip picker is to put the cut and formed pasta on the rod, which belongs to the supporting equipment of the noodle machine. The application of the equipment can better ensure the taste when making favorite pasta. Xiaobian will introduce you to the debugging method of strip picker. Let's have a look

1. Before starting the machine, pull the chain hook by hand to make the left and right hooks symmetrical.

2. Start the pressure test surface, stop the machine and adjust the chain according to the length of pasta suspension.

3. If the front of the pasta is long, adjust the chain hook upward by (front length - rear length) ÷ 2, that is, half of the difference in the length of the pasta. If the back of the pasta is long, lower the hook upward by the same range to make the front and rear length of the pasta rod consistent.

What should be noted here is that if the front of the suspended pasta is long, adjust the chain hook upward by half of the difference in the length of pasta at both ends. If it is the rear food of hanging pasta, you need to adjust the hook downward, the amplitude is the same as that in front, and adjust to the same length on both sides of the noodle rod, so as to continuously produce pasta. The noodle machine presses the dough into hanging pasta through mechanical transmission. It is inevitable that there will be varying degrees of wear after a long time of use. Although the wear can be reduced by keeping the machine adequately lubricated, some wear can not be avoided after long-term use.