Operation Method Of Waste Reinforcement Straightening Machine

Check the wiring of all buttons, switches and indicators on the operation panel of the scrap rebar straightening machine. If any error is found, deal with it immediately, and check the socket and wiring on the CRT unit. The ground wire inspection requires excellent ground wire. Measure the ground wire of waste reinforcement straightener, and the grounding resistance shall not be greater than 1 Ω. 

Check the phase sequence of the power supply, check the phase sequence of the input power supply with the phase sequence table, and recognize that the phase sequence of the input power supply should be common with the phase sequence of the power supply calibrated everywhere on the waste reinforcement straightening machine.