How To Replace The Saw Blade Of Log Sliding Table Saw

The back of the round wood sliding table saw blade is about 0.8mm away from the pulley. If the saw blade touches the pulley when rotating at high speed, it indicates that the saw blade is backward, or the saw blade is forward, or the saw blade is loose, the upper saw wheel or pulley of the saw blade shall be adjusted, or the saw blade shall be unloaded and checked for rolling and finishing again. 

Saw blade tensioner equipment is divided into yellow machine and thallium pressing (heavy hammer type), both of which are yellow machine equipment. The base tension shall be managed and decided according to the width, thickness and transmission ratio of the saw blade. Usually press the saw blade with your fingers to determine whether the tensioning torque is appropriate according to the left and right bending degree of the saw blade.