The Sliding Table Saw Is Safer To Operate In This Way

The Sliding table saw Is Safer To Operate In This Way

1. Clean the area around the sliding table saw before work.

2. Check whether the saw blade is sharp and whether the large and small saw blades are in a straight line.

3. Test run the machine for about 1 minute to see if the machine operates normally. Check the direction of large and small saw blades to ensure that the direction of saw blades is correct.

4. Start working, put the good plate leg sawing machine on, adjust the gear size, and then start working.

5. If the edges and corners of the plate are defective, the saw blade should be replaced.

6. After the cutting task is completed, turn off the power supply and do a good job in the sanitary protection of the saw table and its surroundings.VMzs