Diesel Engine
Preparations Before Starting Single Cylinder Diesel Engine
Adjust the speed regulating knob of the diesel engine governor to about 6 grids, place the load limiting knob at the "5" position of the scale, push the operating handle to the "start" position, and the diesel engine will start immediately. After the start is successful, put the operating handle to the "working" position. The starting speed should be 200r/min,
so that the diesel engine can run at this speed for 2-3 minutes, and then adjust the load limit knob to the maximum load, so that the diesel engine can use the speed adjustment knob to accelerate the diesel engine to the rated speed. The speed adjustment can also be carried out with the help of the servo motor on the governor.
Demand table loading...
|