China Sichuang Machinery Manufacturing Co., Ltd

Plate Compactor

Current location:Home >> News >> Road Machinery >> Plate Compactor

6 tips for operating plate compactor

Author: Date:2022/11/6 6:11:22 Visits:

Safety Operation Procedures for Plate Compactor

1. Check the engine oil level to the required position before starting. Use No. 93 unleaded gasoline and add it at the shutdown.

2. Before work, check whether the links of each screw are loose, and tighten them in time if any.

3. During operation, the clutch of the plate vibration tamper transmits power, and the accelerator should be increased to the maximum position to avoid running at medium speed.

plate compactor

4. When starting the engine, first open the oil circuit switch and the electromagnetic switch, close the choke valve during cold start, pull the handle (gently pull to feel resistance) with a quick pull, open the choke valve after starting, and run at idle speed for 3-5 minutes; The accelerator is increased and the fast running clutch is combined, and the plate vibration tamper starts to vibrate.

5. Hold the handrail to control the direction. The plate vibrating ram is moving forward. When it is moving backward, change the steering handle to complete the work.

6. Shutdown: After the work is completed, turn off the electromagnetic switch and oil circuit switch after the engine runs at idle speed for 3-5 minutes.



Demand table loading...
Your needs:
Your E-mail:     Check code: