Power Trowel
Correct Operation Steps Of The Power Trowel
Master the use method of the power trowel. The polishing machine is also called the polishing machine. Its main structure is a gasoline engine driven spatula rotor, and the bottom surface of the cross in the middle of the rotor is equipped with a spatula. We can learn about the use of the polishing machine in detail through the following article
1. Start the polishing machine and operate the handle
2. Hold the lever tightly to keep the body balanced
3. When the trowel is working, the trowel must be stabilized. When working on the floor, the direction must be adjusted in time to prevent the machine from losing control
4. First rough grinding, then fine grinding. After coarse grinding of the bottom grinding plate, remove the grinding plate when the ground is suitable for fine grinding, and fine grinding with a spatula
It is a coarse and fine troweling machine for concrete surface. The surface constructed by machine is smoother and smoother than that constructed by hand, which can greatly improve the compactness and wear resistance of concrete surface, and improve the working efficiency by more than 10 times compared with that of manual operation.
Demand table loading...
|