Operation Guide For Power Trowel Made In China

Master the use method of the power trowel. The trowel is also known as a light receiver. Its main structure is a trowel rotor driven by a gasoline engine. A trowel is installed on the bottom of the cross in the middle of the rotor. We can learn more about the use of the polishing machine through the following articles：

1. Start the polishing machine and operate the handle.

2. Hold the joystick tightly to keep the fuselage balanced.

3. When the trowel is working, it is necessary to hold the trowel firmly and adjust the direction in time to avoid losing control of the machine.

4. First rough grinding, then fine grinding. After rough grinding with the bottom grinding plate, remove the grinding plate when the ground is suitable for fine grinding and use a spatula for fine grinding.

Trowel is a kind of rough and fine troweling machine for concrete surface. The machine constructed surface is smoother and smoother than the manual constructed surface, which can greatly improve the compactness and abrasion resistance of the concrete surface, and improve the working efficiency by more than 10 times compared with the manual operation.