Specific Operating Steps Of Potato Peeling Machine With Brush

Specific operating steps of potato peeling machine with brush:

1. Install the machine and equipment under the environmental conditions requiring L-S1100, and make corresponding preparations.

2. Connect the clean air source to the equipment and adjust the pressure within the range of 0.55-0.7MPa.

3. Set the time of the brush peeling and cleaning machine.

The cleaning time is set as 4-7 minutes (different according to different products and solvents to be cleaned, and different time shall be set for testing at the initial use to find out the cleaning time and make records for the convenience of later machine cleaning time adjustment); The rinsing time is set as 1-3 minutes (it varies according to the products cleaned and the solvents used, so it is necessary to set different times for testing at the initial use to find out the rinsing time and make records for the convenience of later machine cleaning time adjustment); The drying time is set to 4-6 minutes (different solvents are used, but different times are needed for the first use to test, find out the best drying time, and record it for the convenience of later machine cleaning time adjustment); 4. Put the articles to be cleaned into the cleaning room, close the internal and external safety doors of the brush peeling washer, and start the equipment.

5. When the brush peeling and cleaning machine stops, take out the articles.