Price Of China's Latest Noodle Cutting Robot

Noodle machine is used to process dough, noodles and vermicelli. No lubricating oil is added to the surface pressing machine when it leaves the factory. Therefore, before installation and test run, it is necessary to check whether the oil holes at all parts are smooth, and start the machine after refueling. After startup, it must idle for about 10 minutes, and then check whether the bolts, gears and sprockets of all parts are loose and whether the gear engagement is reasonable.

 Press the surface after adjustment. The chain on the sprocket shall not be too tight or too loose. The chain tightness is generally about 3mm. The whole machine has been debugged before leaving the factory. If it is loose during handling, it can be debugged again according to the manual adjustment diagram.