6 Precautions For Operating Automatic Steamed Stuffed Bun Machine

6 precautions for operating automatic steamed stuffed bun machine

1. Install the conveyor belt. The conveyor belt is removed before packing. The conveyor belt is fixed by four bolts. Just align the bolts with the four holes on the machine. After installation, check the tightness of the conveyor belt, not too tight or too loose.

2. Open the back cover of the machine, take out the grounding protection wire, bind a metal rod on the grounding protection wire and put it on the ground to protect safety.

3. The main power switch of the machine is on the control box on the side of the machine. The green key is on and the red key is off. Turn on the main power switch.

4. First turn on the molding disc switch, and then turn on the noodle feeder switch and stuffing feeder switch. The corresponding adjustable controller with noodle and stuffing above the noodle and stuffing switches is used to control the walking amount of noodle and stuffing, the height of noodle and stuffing from small to large, and let it idle to observe whether each part is normal, shaking or abnormal sound, After inspection, turn the adjustable controller of flour and stuffing to the minimum

5. Open the forming disc cover and add some edible oil on the contact surface between the forming blocks to ensure its lubrication and reduce friction.

6. After the above work is finished, wipe the machine clean.