Precautions For Operation Of CNC Spring Machine

Regular maintenance of spring function can reduce the wear speed of spring machine parts, eliminate long-term hidden dangers of spring machine, and prolong the service life of the machine. We need to do the following work:

1. We should maintain the machine regularly, mainly focusing on cleaning, fastening, adjustment and lubrication. We should maintain the spring machine according to the requirements before, during and after each work. The work is usually done by the spring operator.

2. We sometimes carry out maintenance according to the requirements of various equipment, and we must also carry out corresponding maintenance for the machine within the specified working hours. Maintenance includes the following contents:

3. First level maintenance refers to changing the key work to the lubrication of the machine on the basis of routine maintenance, and then checking and fastening whether the parts of important parts have been cleaned.

4. The so-called secondary maintenance mainly focuses on inspection and adjustment. Specifically check the working conditions of the engine, clutch, transmission and other components of the spring machine. In case of failure, be sure to stop the machine for necessary adjustment, and start the machine after it is normal, so as to better ensure the working performance of the computer spring machine.

5. For three-level maintenance, its focus is on detection, adjustment and troubleshooting. Moreover, the parts that affect the normal working performance of the machine should be diagnosed and inspected. When necessary, the parts must be replaced or adjusted so that the machine can be used normally.