China Sichuang Machinery Manufacturing Co., Ltd

Sawmill

Current location£ºHome >> News >> Woodworking Machinery >> Sawmill

Operation Guide For Horizontal Band Sawmill

Author£º Date£º2022/8/17 23:39:42 Visits£º

The horizontal band sawmill machine is generally operated by hand. When sawing large workpieces, two people shall be provided to cooperate up and down. When performing straight-line sawing, hold the workpiece firmly, stick to the saw ratio, and advance horizontally. The operator can lift the long material slightly, so that the rear end of the workpiece is not lower than the table. The feeding speed shall be properly controlled according to the material properties and workpiece size. It is prohibited to push, pull and collide with the saw blade. When the worker passes the saw back 200mm, he can start to pull. When the rear end of the workpiece is close to the saw tooth for 200mm, the upper hand shall be released and the lower object shall be used to pull the workpiece. When the saw blade does not reach the maximum speed after start-up, do not feed the workpiece to avoid sudden increase of motor load.

sawmill

In case of clamping saw during the work, the saw mouth of the workpiece shall be separated from both sides by hand. Do not reverse to prevent the saw blade from falling. In case of saw running and blade shifting (the saw blade swings back and forth), stop the machine and check the saw blade, saw material (Road), saw card and saw wheel. After the saw blade operates normally, perform sawing. When the path of the saw blade on the workbench is blocked by wood debris, it shall be pulled away with a wooden stick. Do not touch it with your fingers. In order to prevent resin wood chips from sticking on the surface of saw blade and saw wheel, and increase the friction and resistance between saw blade and saw wheel, kerosene can be used for scrubbing during work.



Demand table loading...
Your needs£º
Your E-mail£º     Check code£º