Correct Usage Of Mortar Spraying Machine

Operation Guide for Mortar spraying machine

1. Before starting each shift, press the manual oil pump several times to inject oil into the transmission part.

2. After the power is connected, the main motor shall be driven first to check whether the rotation direction of the rubber screw is all. If not, the power phase line shall be replaced (this check shall be carried out every time the power is reconnected).

3. Connect the conveying hose and nozzle, add 5L of clean water to the hopper, start the motor to pump out the clean water, wet the hopper, pump body and conveying hose, and then stop the machine after pumping out most of the water.

4. Add putty or paint to the hopper to start spraying (start the air compressor and open the air valve first).