China Sichuang Machinery Manufacturing Co., Ltd

Rendering Machine

Current location£ºHome >> Products >> Construction Machinery

Rendering Machine

Date£º2022/2/28 14:05:03 Visits£º

Rendering Machine

Rendering Machine video

Demand table loading...
Your needs£º
Your E-mail£º     Check code£º

Rendering Machine Description

Plastering machine is also known as rendering machine and spraying machine. It is a special machine for wall plastering. A vertical gantry and a winch with opposite scraper frame are installed on the top of the chassis. A hopper above the chassis and connected with the chassis is installed on the inner sides of the two columns of the scraper frame. The hopper can be slidably attached to the two columns up and down through the winch. One side of the gantry is provided with a discharge port on the upper facade of one end of the hopper, A scraper is installed at the lower part of the discharge port; In the hopper, a shift roller is supported along its width direction, the motor is connected with the shift roller through a reducer, and the other end of the hopper is provided with a feed inlet.

Advantages of wall plastering machine:

1. The project date can be greatly advanced: single project can achieve excellent project.

2. A plastering machine can work for 10 craftsmen: no scaffold and save the cost of building shelves.

3. Special chute, special steel wire rope: stable operation, no wire falling, continuous wire and no wire jam.

4. Perpendicularity, flatness and smaller than manual error: reduce the labor intensity of craftsmen and improve work efficiency.

5. Dual motor split operation: the lifting speed is uniform and stable, the operation is completed independently, and the wall is flat, bright and smooth.

6. No landing ash: save water and materials, which is about 20% less than manual ash and materials, and reduce the construction cost by about 1%.

7. Light and convenient: it is widely used in the interior and exterior decoration of houses, saving time, labor and materials, greatly reducing the labor intensity of workers and improving work efficiency.

8. Unique lifting clutch device: it reduces the trouble that the wall plastering machine is equipped with multiple sets of pillars, and can paint the wall at any height.

9. The adhesion force is stronger than manual strength: it has the function of slurry lifting in the production process, and two people a day can produce 400m2 inner wall.

10. The plastering machine does not need to be scarred and leveled: there is no dead corner, crack and ash leakage. The doors, windows, columns and internal and external corners can be painted freely. The mortar flow and speed can be adjusted at will, which is more than ten times the efficiency of manual plastering. The plastering quality meets or exceeds the national excellent engineering standard, improves the engineering quality and reduces the engineering time.

Cleaning and maintenance methods of rendering machine:

Cleaning and maintenance of the plastering machine is very important. Thorough cleaning and immediate maintenance will make the plastering machine look like a new one every day, and regular maintenance and cleaning will prolong the service life of the plastering machine.

Cleaning method: washing key points: inside and outside of conveyor belt, vibrator, front and rear of formwork, ash hopper, hydraulic casing, climbing wheel, caster and surface washing. 1. There is sand dust on the vertical pole. Wash it up and down with woven bags covered with water. 2. If there is sand and dust on the nylon wheel, pull out the vertical rod, hit out two sleeves with hydraulic pressure and wash them with high-pressure water.

Maintenance of plastering machine: the guide column in the oil window, the movable part of the plastering board turnover rod, the clutch plate of the electromagnetic clutch, the hydraulic sleeve, the chain, steel wire rope and all solid wires should be oiled once a day.

Rendering Machine News

Demand table loading...
Your needs£º
Your E-mail£º     Check code£º